1. More energy-saving-light-emitting diodes use super-bright and high-power led light sources, combined with high-efficiency power supplies, with high brightness, which saves electricity compared with ordinary lights, and greatly reduces energy costs. Light-emitting diodes require less energy than other light sources in production, reducing the impact on the environment.
2. More reliable-the bulb filaments in general bulbs are fragile and easy to break, but LEDs are not. The luminous time is as high as 100,000 hours, and the light decay is 50% of the initial.
3. Safer-the low heat and low voltage requirements of light-emitting diodes make it a safer light source. The light-emitting diode is a type of lamp without radiation and infrared radiation. It is very shock resistant and has strong shock resistance. There is no filament and glass casing in the light-emitting diode, and it is not easy to crack. Using it will not cause any damage to the human body. harm.
4. Protect the environment-no hazardous substances exist, environmental protection. In the issue of global warming, light-emitting diodes have helped a lot.
5. Elimination of stroboscopic light-the light-emitting diode is a pure DC work, there will be no stroboscopic phenomenon, which eliminates the phenomenon of visual fatigue caused by stroboscopic phenomenon during use.
6. No voltage limit-the number of voltages of light-emitting diodes can be used worldwide, the full voltage range index of light-emitting diodes is between 85v and 264v, which further ensures that the brightness and service life of light-emitting diodes will not be affected by voltage The impact of volatility.
The light-emitting diode can reduce the damage to the circuit and will not cause pollution to the power grid, because its EMI meets the global index, the power factor is greater than or equal to 0.9, and the second harmonic distortion is less than or equal to 20%, which can reduce the power loss of the supply circuit.
7. Rugged-The light-emitting diode is completely encapsulated in epoxy resin, which is stronger than light bulbs and fluorescent tubes. There is no loose part in the lamp body, which also makes the light-emitting diode difficult to damage.