For smd inductor, under normal circumstances, there will be no short-circuit phenomenon. A large part of the short-circuit phenomenon is because the current in the circuit is too high, exceeding the rated current of the smd inductor, and ta
Switching diodes have good high-frequency performance and are mainly used in switching circuits as electronic switches, while rectifiers generally have poor high-frequency performance (the rectifiers in switching power supplies are also ver
The classification of chip inductors is as follows: Classified by working frequency Inductance can be divided into high frequency inductance, medium frequency inductance and low frequency inductance according to the operatin
Series (volume): 0805 Unit: method (F), micro method (uf), picofarad (pf) Capacity: 0.5pF~100uF 10PF~100UF Voltage: 4V~3KV (DC) Deviation: D—005—±0.5%, F—01—±1%, G—02—±2%, J—I—±5%, K—II—±10%, M—III Level—±20% Material: NPO, X
Volume: 0402, 0603, 0805, 1206, 1210, 1812, 2010, 2512, Resistance: 0R-10MR Power: 1/20W—3W Deviation: F=±1%, J=±5%
smd inductor can be divided into wire-wound inductor and non-wire-wound inductor.
SMD tantalum capacitor series: TAJ, TAC, TLC, TLJ, TAC, TAK, TPS, TPM, TCJ, TRJ, THJ,... SMD tantalum capacitor volume: Type A (3.2*1.6) Type B (3.5*2.8) Type C (6.0*3.2) Type D (7.3*4.3) Type E (7.8*4.5) Capacity: 0.1uF-1000uF Voltage:
SMD aluminum electrolytic capacitor Capacity: 6.8~1500uF, 2.5~25V SMD aluminum electrolytic capacitor Deviation: M=±20%, 120Hz, 20℃ SMD aluminum electrolytic capacitor Series: φ3 φ4 φ5 φ6.3 φ8 φ10 SMD aluminum electrolytic capacitor Pack
A good precision resistor must have the characteristics of small aging, small temperature drift, and small deviation. At the same time, it must have high reliability, large power margin, small temperature rise, low noise, small series induc
With the continuous update of chip resistor technology, even small chip resistors have the advantages of long life, high stability, high voltage resistance, and less space, which are deeply loved and depended on by the majority of manufactu