Tel
+86 400-003-5559
-
![[Dry goods] What is the effect of temperature on MLCC?](/upload/images/2021/6/a8abfbb86aa71cec.jpg)
[Dry goods] What is the effect of temperature on MLCC?
The temperature characteristics of MLCC are determined by EIA standards and JIS standards. The classification table, as shown in the figure above, 5U/Y5V and Z5U/Z5V have also been changed to the second category. In fact, many scenes are no
2020-05-29 02020-05-29 Click: 0 -
Selection of multilayer ceramic chip capacitors
1. Utilizing the thinning of the dielectric layer of the chip ceramic capacitor and the multi-layer stacking technology, the capacitance value is greatly expanded; 2. The monolithic structure guarantees excellent mechanical strength and
2020-04-17 02020-04-17 Click: 0 -
What is the difference between light-emitting diodes and diodes?
The light-emitting diode will emit light when it conducts in the forward direction. The forward voltage drop is larger than that of ordinary diodes. The reverse voltage is generally 5V, while the forward voltage drop of ordinary diodes is 0
2020-04-03 02020-04-03 Click: 0 -
Why does the capacitor heat up
It can be said that almost all components heat up, and of course capacitors are no exception, but why do they heat up?
2020-04-02 02020-04-02 Click: 0 -
Do you know the difference between tantalum capacitors and ceramic capacitors?
Tantalum capacitors are characterized by low loss, large insulation resistance, small size, large capacity and good stability. The ceramic capacitor is characterized by low loss and high stability, but the capacity is generally small, and t
2020-04-01 02020-04-01 Click: 0 -
SMD electrolytic capacitor is broken, teach you how to identify
Some manifestations of the damage of SMD electrolytic capacitors are: 1. Complete loss of capacitance, reduced capacitance, slight, severe leakage, loss of capacitance, reduced capacitance, and leakage.
2020-03-30 02020-03-30 Click: 0 -
How to identify which material the smd capacitor is?
How to identify smd capacitor of different materials? The appearance recognition method of the smd capacitor is obvious, and it is more difficult to identify the same type of capacitor. The following editor will explain the method of ident
2020-03-28 02020-03-28 Click: 0 -
Application of high-voltage chip capacitors in power products
SMD high-voltage capacitors are common in automotive electronic products and power supplies and other application fields, in order to obtain stronger commercial application practical effects and make the products more stable in use. It is i
2020-03-25 02020-03-25 Click: 0 -
SMD capacitor reading method
Unlike resistors, the capacitance of chip capacitors is not directly marked on the surface of the capacitor. There is nothing on the surface of chip capacitors (this is also a way to distinguish chip resistors from capacitors of the same si
2020-03-24 02020-03-24 Click: 0 -
The effect of adding capacitors to electric vehicles
The capacitor has the function of blocking the direct current and the alternating current. The internal resistance of the battery is a few tenths of an ohm. The electric motor of the electric vehicle is resistant to the driver. It is a freq
2020-03-21 02020-03-21 Click: 0 -
Factors affecting capacitor life
Electrolytic capacitors are widely used in different fields of power electronics. The life of electrolytic capacitors depends on its internal temperature. Therefore, the design and application conditions of electrolytic capacitors will affe
2020-03-13 02020-03-13 Click: 0 -
What effect does the positive and negative poles of SMD tantalum capacitors have when they are inserted reversely?
The distinction between the positive and negative poles of SMD tantalum capacitors is very important. If the positive and negative poles of SMD tantalum capacitors are connected reversely, the impact will be greater. Tantalum capacitors hav
2020-03-11 02020-03-11 Click: 0
Home
Products
About us
Contact
Top