Tel
+86 400-003-5559
All capacitors that use ceramics as a material are called ceramic capacitors. Most people are called by patches and plug-ins, but this name is not very uniform. There are still many people who call them based on their shapes, such as chip c
Characteristics of chip capacitors (1) The allowable large deviation range between the actual capacitance of the chip capacitor and the nominal capacitance. The general capacity error is: J level ±5%, K level ±10%, M level ±20%, and the al
An electrolytic capacitor is a type of capacitor. The metal foil is the positive electrode, and the oxide film of the metal close to the positive electrode is the dielectric. The cathode is composed of conductive materials, electrolytes and
Model/Specification: 1206 Environmental protection category: Ordinary Installation method: SMD type Packing method: tape and reel packaging Lead wire type: no lead wire Features: rectangular Nominal capacity range: 681K Rated voltage
I think many small partners have this problem, that is, what is the difference between tantalum capacitors and ordinary capacitors, and can they be replaced during their work. Next, I will show you all about it!
Aluminum electrolytic capacitors are etched on the surface of the foil made of metal aluminum. The aluminum foil is coated with a thin aluminum oxide insulating layer, which is the dielectric of the capacitor. Aluminum is coated with a non-
The life of electrolytic capacitors is one of the issues that everyone is concerned about, because the life of electrolytic capacitors directly affects the normal use and replacement of electrolytic capacitors. For this reason, we must impr
Characteristics of aluminum electrolytic capacitors and precautions for selection Aluminum electrolytic capacitor is an important part of most electrical designs, so its correct selection is the key to the success of many designs. Therefor
SMD capacitor: 0603 (1.6MM*1.8MM) Capacitance capacity: 0.2p-100uF 0.2Pf--10Uf full series Voltage: 6.3V Error: C=±0.25pF, J=±5%, K=±10%, M=±20%, Z=-20%+80%
How amazing are the densely packed accessories on the electronic circuit boards of electronic products? The operation of electronic products depends on them! I believe that everyone is not unfamiliar with electronic components, even if they
In the past, high-voltage electrolytic capacitors were usually DC capacitors, but now they have developed from DC to communication, from low temperature to high temperature, from general to special, and from normal structure to chip, flat,
Tantalum capacitor Main models: TAJ, TPS, T494, T495, T510, 293D, 593D, TCFG Capacity: 0.1uf~1000uf Accuracy: ±20% Working temperature: -55℃~125℃ DC exposure current: 35.2 uA Loss factor: 10% Equivalent series resistance: 0.5Ω 100kHz